Premium car care products

ABOUT

All ADBL products are created by us from scratch. Starting with advanced formula, up to uniquely shaped containers. We’re a bunch of detailing devotees, as well as chemistry experts. This is why we know exactly what a car enthusiast or a professional detailer expects from car care products. Every single one of our products is a result of months of work and lots of testing. Thanks to this we can be sure that our products are exceptionally efficient, make your work easier, but most of all, are safe for your vehicle. Despite the fact we’ve been operating only for 2 years now, the unique features of our products make them a go-to choice for the most demanding car enthusiasts and professionals.

ADBL Glass Cleaner is a ready to use liquid glass cleaner for your car. Glass Cleaner is a liquid different from all others you have used so far. Contains trace amounts of alcohol, which has been replaced by non-toxic solvents with a purity of cosmetics. Glass Cleaner leaves glass well-degreased and streak free. Glass Cleaner is very efficient and easy to use, and the smell of juicy quince enhances your work. Does not contain phosphates and ammonia. Directions: 1. Spray on the surface. 2. Rub the fluid with a microfiber cloth with short fibers. 3. Buff the glass with clean and dry microfiber mitt. 4. If appropriate, repeat the action. Additional instructions: - Original washer has the ability to control the sprayer's degree from mist to stream. - for final washing, the liquid may be diluted 1:2 Always use on cold surfaces and in the shade.

APC ADBL Pro is a powerful brother of ADBL APC ideal for professional auto detailing studios. Concentrated, very strong, universal product for cleaning heavy plastic debris, vinyl, upholstery materials, for cleaning parts outside the vehicle, as a prewashing. Perfect degreasing, low foam, enriched with natural citrus solvents formula quickly penetrates and dissolves dirt. Massive concentration of cleaning ingredients, emulsifiers, chelating agents and safe solvents places APC Pro at the forefront of the most powerful and secure means of this kind on the European market. Safe for the cleaned surface. Dosage: from 1:10 for heavy dirt to 1:80 for light soiling Directions: 1. Prepare a working solution. 2. Apply the solution on the surface to be cleaned and spread with a sponge or brush. 3. Remove the dissolved impurities by wiping with a cloth, by rinsing with (distilled ) water. 4. If necessary, repeat steps 1 to 4. Additional instructions: Be sure to spot test the surface in an inconspicuous area. Cleaned surface should be cool. Do not leave it to dry on the cleaned surface.

ADBL QD1 is a fully synthetic quick detailing spray, with high concentration of polymers and extra synthetic wax. It successfully removes any dust, fingerprints and fresh marks left by hard water. Intense smell, quick evaporation, no streaks. Ideal for use after each wash. It improves the durability of a wax layer, while providing non-detailed cars with high gloss finish and protection until the next wash. Instructions for Use: - Spray the product onto a dry coat. - Wipe the surface dry with a microfiber cloth. If too much product is applied, polish the surface with another, clean and dry microfiber cloth.

ADBL Shampoo Pro is a product designed for professionals. High concentration (about 10ml/10l of water) and excellent cleaning properties make Shampoo Pro ideally suited for the preparation of paint for correction and to its degreasing prior to protection. The formula contains no lubricants, polishing polymers or waxes. It washes away very quickly without leaving any residues. This composition, rich in cleaning agents and natural citrus oils, leaves paint free of contaminants and substances that might prevent the binding of wax, sealant or a varnish coating. Ideally suited for washing cars protected with quartz and ceramic coatings. May disturb or remove weak wax and sealant. Directions: 1. Rinse the car with water under pressure from the loose dirt. 2. Pour 10-20ml of shampoo into a bucket and fill with 10l of water. 3. Wash your car from top to bottom while applying the solution with a mitt. 4. Rinse the car with water under pressure. Before applying, make sure that the surfaces are cool and the car is in the shade. Do not let the shampoo dry on the body. We suggest using the two-bucket wash method combined with a microfiber or woolen mitt.

ADBL APC Concentrated, versatile product for cleaning all surfaces inside and outside the car. It works comprehensively penetrating the dirt and separating it from the surface. Special additives stop the dirt in the solution and form an easily removable suspension. Safe for the cleaned surface. Dosage: from 1:4 for heavy dirt do 1:80 for light soiling Directions: 1. Prepare a working solution. 2. Apply the solution on the surface to be cleaned and spread with a sponge or brush. 3. Remove the dissolved impurities by wiping with a cloth or by rinsing with water. 4. If necessary, repeat steps 1 to 4. Additional information: Be sure to spot test the surface in an inconspicuous area. Cleaned surface should be cool.

ADBL GreeN'gine is a concentrated liquid for cleaning heavily soiled surfaces. Thanks to the mixture of slowly vaporizing and secure solvents with high quality surfactants in alkaline environment, we obtain a product which wets well, penetrates and separates the grease from the surface. After contact with dirt, it chemically binds it so that rinsing the surface becomes extremely easy. Directions: 1. Prepare a working solution from 1: 1 to 1:10 (engine compartment), and 1: 4 to 1:20 (body) depending on the degree of contamination. 2. Apply the solution on the cleaned surface and leave it to act. The reaction time depending on the soiling and the surface ranges from 30 to 180 seconds. Never leave to dry. 3. Rub the product by means of a brush or sponge. 4. Rinse thoroughly with water under pressure. 5. If necessary, repeat steps 1 to 4. Additional information: Be sure to spot test the surface in an inconspicuous area. Cleaned surface should be cool.

ADBL Shampoo is a highly concentrated shampoo for the body. The shampoo has a neutral pH, which makes it safe for all surfaces of your car. Lemon and orange oil additives make it able to remove even the toughest stains and Cola scent makes cleaning time more enjoyable. Recommended dose is only 25-30ml of shampoo to 10l of water. Directions: 1. Rinse the car with water under pressure from the loose dirt. 2. Pour 25-30 ml of shampoo into a bucket and fill with 10l of water. 3. Wash your car from top to bottom while applying the solution with a mitt. 4. Rinse the car with water under pressure. Before applying, make sure that the surfaces are cool and the car is in the shade. Do not let the shampoo dry on the body. We suggest using the two-bucket wash method combined with a microfibre or woollen mitt.

ADBL Tar and Glue Remover is an environmentally friendly product based on natural vegetable oils. It easily removes asphalt, grease, adhesives, etc. from the body or the engine compartment, etc. Safe for paint, plastics, leaves no greasy residue. Directions: 1. Apply on dry surface from bottom to top. 2. Allow 5-10 minutes for the formula to work. 3. Rinse with water under pressure and wash the car with a shampoo. 4. If necessary, repeat steps 1 to 3. Additional information: Be sure to spot test the surface in an inconspicuous area. Cleaned surface should be cool.

ADBL Tire and Rubber Cleaner It has been specially designed for perfect cleaning of tires and rubber parts of your car. Its operation is based on a unique blend of cleaning compounds with a balanced amount of additives. It contains ingredients to facilitate leaching and drying the tires. It works instantly penetrating and removing dirt and residues from tire dressings. It's a perfect degreaser leaving the surface clean and ready for the application of a new dressing. Directions: 1. Apply the product on a moistened surface and wait for about 1 minute. 2. Spread with a brush. 3. Rinse thoroughly with water. 4. If necessary, repeat steps 1 to 3. Additional information: - Be sure to spot test the surface in an inconspicuous area. - Cleaned surface must be cool. - Absolutely do not use on polished aluminium rims. - Do not leave to dry.

ADBL Vampire is a pH-neutral product that removes deeply embedded metallic dirt from the surface of rims and paint. Thanks to refined gel formula, you can work with it longer than with competing products. A single application spread with a moistened brush allows you to use the product several times. Thus, you can can prolong its action for another few minutes after each application with a brush, which will dissolve even very old and the most embedded brake dust with a small amount of product. Ideal for removing dust from brake pads and volatile corrosion from rims and paint. Safe for painted wheels and for polished aluminium. Directions: 1. Spray the product covering the whole of the contaminated surface. Note that the cleaned element must be cool. 2. Leave the product to act. ADBL Vampire may lie on the surface up to 15 minutes. 3. Spread the product on the surface with a brush or sponge. 4. Rinse thoroughly with water under pressure. 5. If necessary, repeat steps 1 to 4. Additional information: To increase the effectiveness, before applying ADBL Vampire, you can pre-wash the wheels with Wheel Warrior ADBL and / or ADBL APC. Do not leave it to dry! Before use, ensure that the cleaned surface is cool! Before use, be sure to spot test the surface in an inconspicuous area!

ADBL Wheel Warrior is an acidic liquid for rims with a pleasant and intense fruity scent. It easily dissolves dirt, rust, hard water deposits. Perfect for periodic cleaning and pre-washing wheels as a step preceding the application of ADBL Vampire. Wheel Warrior can be used in a dilution up to 1: 4. Directions: 1. Rinse rims with water to remove all the loose dirt. 2. Apply Wheel Warrior. 3. Allow a few minutes for the formula to work. 4. If necessary, spread with a brush. 5. Rinse the rim thoroughly under pressure and before the application of Vampire, neutralize the rim with a Vampire ADBL APC solution and rinse again. 6. If necessary, repeat steps 1 to 5. Additional information: - Apply only on a cool rim. - Do not use the Wheel Warrior on polished aluminium, anodized rims, etc. - Use only on a moistened surface. - Do not use on varnish or glass. - Before using the Wheel Warrior, be sure to spot test the surface in an inconspicuous area.

Vampire Liquid is intended for the extraction of dust from car brake blocks, volatile rust and other metallic impurities from the entire car body. Its semi-liquid consistency makes it easier to spray over any surface, prevents any run-offs and enables longer operation as it does not dry too quickly. Due to its neutral pH, the product is safe for any types of external car surface and may be applied in everyday maintenance of rims and car varnish. It successfully removes any ongoing road impurities. Instructions for Use: 1. Spray it onto the entire area of contaminated surface, Make sure that the surface being cleaned is cool. 2. Leave it on the surface for 2-5 minutes. 3. If necessary, spread it on the surface with paintbrush, brush or sponge. 4. Rinse thoroughly with pressurised water. 5. If necessary, repeat steps 1 to 4. Additional instructions: For greater efficiency, before applying the Vampire Liquid, remove any ongoing impurities from wheel rims with the use of the ADBL Wheel Warrior or ADBL APC. Do not leave the product to dry! Before use make sure that the surface being cleaned is cool Before use always perform a test application in the least visible part!

ADBL INTERIOR QD is the second product in our series of quick detailers. INTERIOR QD can be used in any car interior. It will refresh the interior, remove small stains and restore all the elements to their natural look.INTERIOR QD does not leave smudges on varnished elements. All internal plastics regain a fresh look in minutes while UV filters will protect them from aging. Usage: Apply the product on a surface with a sprayer and rub it after a moment with a dry towel made of microfibre. If needed, repeat this action. Caution! Do not leave to dry on the cleaned surface. Before cleaning, conduct a test in an inconspicuous place . Storage temperature: 5-25 oC.

ADBL Interior WOW is a banana-smelling dressing to all plastics in your car. It nourishes plastic, vinyl and rubber, while providing a deep satin finish. Prevents the deterioration of plastics thanks to very strong UV filters. After application, the created protective layer minimises dirt adhesion and special additions act antistatically. Usage: 1. Apply the product by sprinkling the surface. 2. Apply evenly with a microfibre cloth. 3. Leave to dry. Caution! Keep in 5-25 oC temperatures. Shake strongly before usage. Protect from sunlight.

ADBL Micro Wash is a specialised product for washing microfibre cloths. This mixture of natural and synthetic detergents, additions which soften water and natural solvents is composed in such a way as to not affect the natural properties of microfibre after washing. ADBL Micro Wash removes deeply ingrained dirt, restores softness and absorbency. It leaves a subtle citrus and apple scent. Use 40-50 millilitres for a whole washing machine. Wash at temperatures between 40 and 90 oC. When you need to deal with very ingrained dirt, put the cloths in warm water with ADBL Micro Wash (50 millilitres/1 litre of water) and manually remove the biggest stains before you place them into a washing device.

ADBL Pre-Spray is a product of the newest generation for professionals to use for washing car upholstery fabric, floor covering and floor mats. Immediately removes the most ingrained dirt. It can be also used as a stain remover. ADBL Pre-Spray's advantage is its speed of action in comparison to powder forms available on the market and a high concentration that makes the product very efficient in use. Dosage: 1:10 as a stain remover. 1: 15 - 1: 20 as a pre-spray for ingrained dirt. 1:30 - 1:60 as a pre-spray for ingrained and every-day dirt current. Usage: 1. Prepare a working solution with warm water of a temperature of approximately 40 oC in accordance with the directions above. 2. Apply the solution on a fabric with a sprayer (each element should be carefully dusted before washing) 3. Scrub the element with a soft brush. 4. Rinse the remainders of the product and dissolved dirt with an extraction vacuum cleaner containing warm water or ADBL TextileRinse solution. 5. If needed, repeat steps from 2 to 4 and/or increase the concentration of the working solution. Caution! The maximum time of contact between the product and fabric should be 5 minutes. Do not leave the solution to dry. Always conduct a test of colour stability. In case of very ingrained dirt, use ADBL TextileRinse to accelerate and strengthen the effect of fabric rinsing.

ADBL Quick Wax is a mixture of waxes and polymers. Thanks to the use of a new generation of emulsifiers, QuickWax is very easy to apply and hardens quickly. It is easy and pleasant in use. It may be used individually or as an additional layer on wax or sealant that was previously applied. The visual effects after use are an incredible depth of colour, gloss and hydrophobicity that is equivalent to that of hard waxes in polish. Quick Wax lasts for 2000-3000 kilometres depending on atmospheric conditions and the method of cleaning. Usage: 1. Sprinkle the product on a dry varnish. 2. Wipe with microfibre cloth until it's dry. If you use too much product, polish it again with a second microfibre cloth which needs to be clean and dry. Keep in a dry and cold place away from sunlight. Storage temperature: 5-25 oC.

ADBL Textile Rinse is a product to use in washing vacuum cleaners which improves rinsing the dirt from upholstery that was earlier dissolved by ADBL Pre Spray. ADBL Textile Rinse has anti-foaming and damping properties. The neutral pH of the solution means that rinsing the remainders of Pre-Spray combined with dissolved dirt is faster than if we used only water. Textile Rinse leaves fabrics free of dissolved dirt and remainders of surfactants, and with a subtle and fresh scent. Usage: Pour 50 millilitres of Textile Rinse into 9-10 litres of water. Pour the prepared solution into the washing device's tank. Continue in accordance with the washing device's manual.

ADBL Wipe Out is a mixture of quickly evaporating solvents. ADBL Wipe Out is made for removing all remainders of abrasive compounds from varnish, so that every applied layer, wax or sealant will maximally integrate with varnish after the correction. It can be also used for inspecting the varnish in detail. Wipe Out also does well when it comes to removing remainders of glue from masking tapes, stickers and resin. Usage: 1. After you finish polishing, ensure that the varnish is cold. 2. Apply on the element with a sprayer and wipe it with a soft microfibre cloth. If needed, repeat step 2. Caution! Check how the product works in an inconspicuous place. Do not apply on hot elements. Ensure that there is good ventilation in the workplace.